Product features

1.Safety

◆Designed with protective cap

Protective caps can effectively protect the inner set and prevent the premature launch of safe blood lancet due to extrusion during transportation.

Protective cap has anti-dust function to ensure that the product is free from contamination.

◆Self-destructive design

After the needle is launched, the needle will be locked and cannot be launched again. The self-destruction of the blood lancet can only be used once, which can guarantee the user's safety

◆Radiation sterilization

The product core is sterilized with 25kGy irradiation

2. Convenience

◆Designed with protective cap

The cap can be removed quickly and lightly after being rotate half circle, very convenient to operate.

Aim at the blood point at the contact position as shown in the picture. Touch lightly, easy and quick.

The size designed of safety blood lancet is small, the dimensions with the height, the width and thickness is 105px, 40px and 27.500000000000004px respectively. Carried easily, anytime and anywhere to meet the micro blood collection.

3.Accuracy

As shown on the picture, the diameter of the pin core emitting port is only 6mm. The blood collection point can be seen visually, and the operator can accurately target the blood collection point.

When the needle is launched, it will be guided according to the internal structural slide. The needle can be launched in line with the track, without jitter, this will ensure that the blood sampling is accurate and enough to collect blood.

4.hypodynia

◆Needle tip technique

The high quality, super-sharp needle tip design can quickly puncture the skin and reduce the pain of the patient.

◆Spring design

The spring is in the initial nature state. The spring elasticity is not damaged when used. And the needle pierces the skin quickly through the internal slide, this will reduce the pain and can ensure the product’s timeliness.

◆Fast rebound technology

The internal structure of the product is exquisitely designed, which can guarantee the rapid launch of spring, quick rebound and lock the needle core after launch. Reduce the pain felt by users.

Proper use method

1. As shown in the picture, turn and pull the protection cap to remove and discard in the junk box.

2. Target the blood lancet to the blood collection position, Press the needle hard and fast to collect blood.

3. After completing the above steps, obtain the corresponding blood collection and discard the used blood collection needles.

Using wrong method

1.Don't pull the protective cap out directly, which makes it difficult to use.

2.In the blood collection must be the needle body and skin fully contact, can not leave any angle and gap.